How often should a tanker truck be serviced?

Jul 09, 2025 Leave a message

First Maintenance:

Mileage: Approximately 3,000 kilometers

Service: After the initial vehicle run-in, check for potential problems and lay the foundation for future use.

Second Maintenance:

Mileage: Approximately 18,000 kilometers

Service: As the vehicle ages and components wear and tear, a comprehensive system maintenance is performed.

Third Maintenance and Subsequent Maintenance:

Mileage: Every 15,000 kilometers after 33,000 kilometers

Service: Continuously maintain vehicle performance and reduce the risk of breakdowns.

Daily Maintenance:

Frequency: Daily

Service:

Clean the vehicle body and check tire wear, air pressure, and connections.

Check lubricant and fuel levels, cooling water level, hand/foot brakes, steering, instruments, lights, etc.

Add fluids (such as fuel and coolant) to ensure normal operation of the vehicle.

II. Component Maintenance Cycles

Engine Oil and Three Filters:

Mileage: Replace every 15,000 km

Service Details: Replace engine oil and oil filter, air filter, and fuel filter to ensure engine lubrication and cleanliness.

Gear Oil:

Mileage: Replace every 20,000 km

Service Details: Ensure stable operation of the transmission system.

Grease:

Rainy Season: Apply every 15 days

Normal Season: Apply monthly

Service Details: Apply to key parts such as the bow and steering gear to prevent rust and wear.

Four-Wheel Maintenance:

General Vehicles: Every six months

Long-Distance Vehicles or Dump Trucks: Once a month, with brake adjustment every two weeks.

Service Details: Check the brake system, tire wear, and air pressure to ensure braking and driving safety.

Border Inspection Oil:

Frequency: Add monthly (if required for border inspection)

Service Details: Ensure the proper functioning of relevant inspection parts.

III. Special Maintenance Cycles

Chassis Vehicle Level 1 Maintenance:

Mileage: Performed after 3,000-3,500 km of cumulative mileage

Contents: Clean the filter, change the engine oil, and remove impurities from the vehicle interior to reduce component wear.

Chassis Vehicle Level 2 Maintenance:

Mileage/Time: Performed after 10,000-11,000 km of cumulative mileage or every six months

Contents: Check valve clearance, replace the filter, and inspect components to optimize vehicle performance.

Seasonal Maintenance:

Winter: Check insulation measures to ensure the engine and other key components operate normally in low-temperature environments.

Summer: Check the cooling system to prevent damage from high temperatures.

Breaking-in Maintenance: